Rome to Ferno (VA)
1h 03mgate to gate
The flight from Rome–Fiumicino Leonardo da Vinci International Airport (FCO) to Milan Malpensa International Airport (MXP) covers 511 km (317 miles) and takes approximately 1h 03m gate to gate for a typical jet.
The route heads north-west on an initial great-circle bearing of 328°, passing near 43.7° N, 10.5° E at its midpoint.
Bearing 328° north-west Midpoint 43.7° N, 10.5° E Model 805 km/h + 25 min
SOURCE·OurAirports + great-circle computation·REVIEWED JUL 2026
How this is worked out
- Take both airports' published coordinates from OurAirports — nothing here is scraped from another flight site.
- Great-circle distance by haversine on a mean earth radius of 6,371.0088 km: 511 km.
- Airborne time = that distance ÷ 805 km/h, a representative jet cruise speed: 38m.
- Add a flat 25 minutes for pushback, taxi, climb, descent and taxi-in — the reason a 400 km hop is never half an hour: 1h 03m gate to gate.
- Winds, aircraft type and airline schedule padding are not modelled. The cruise-speed table shows how much that assumption is worth.
511 km / 805 km/h = 38m airborne
+ 25 min ground = 1h 03m gate to gate
SOURCE·OurAirports + great-circle computation·REVIEWED JUL 2026
The same route, plotted on a world grid
The strip above gives the route its length and its shape. This gives it a position: latitude and longitude only, no coastlines, because a hand-drawn coastline would be decoration pretending to be data. On a flat grid the shortest path looks bent; on a globe it is straight.
Flight time at different cruise speeds
Aircraft type, winds and routing all move the real number. This is the same distance flown at different speeds, plus the 25-minute ground and climb allowance.
| Typical of | Cruise speed | Airborne | Gate to gate |
|---|---|---|---|
| Turboprop / regional | 550 km/h | 56m | 1h 21m |
| Narrowbody jet (A320, 737) | 780 km/h | 39m | 1h 05m |
| Widebody jet (777, 787, A350) | 900 km/h | 34m | 59m |
| Private jet (Gulfstream) | 850 km/h | 36m | 1h 01m |
Headwinds on an eastbound long-haul routinely add 30–60 minutes; the same route westbound can be quicker. Airlines publish schedules with padding built in.
SOURCE·OurAirports + great-circle computation·REVIEWED JUL 2026
Both airports
| FCO | MXP | |
|---|---|---|
| Airport | Rome–Fiumicino Leonardo da Vinci International Airport | Milan Malpensa International Airport |
| City | Rome | Ferno (VA) |
| Country | Italy | Italy |
| ICAO | LIRF | LIMC |
| Coordinates | 41.8045, 12.252 | 45.6306, 8.7281 |
| Elevation | 13 ft | 768 ft |
Every figure on this plate is geometry. The shape of the earth is knowable; the airline's schedule is not.
Questions this plate answers
How long is the flight from Rome to Ferno (VA)?
A non-stop flight from Rome (FCO) to Ferno (VA) (MXP) takes about 1h 03m. The great-circle distance is 511 km (317 miles, 276 nautical miles), flying north-west on an initial bearing of 328°.
How far is Rome from Ferno (VA)?
511 kilometres in a straight line over the earth's surface — 317 miles or 276 nautical miles. Actual flown distance is usually 2–5% longer because aircraft follow airways, avoid weather and route around restricted airspace.
Is there a non-stop flight between FCO and MXP?
This page calculates the direct-line time and distance; it does not track airline schedules. At 511 km the route is comfortably within range of a non-stop service if an airline chooses to fly it. Check an airline or booking site for what is actually scheduled.
Airport coordinates from OurAirports (public domain). Distance is a great-circle calculation; flight time uses the model described on the method page. Flight times are great-circle estimates for planning only — always check the airline's published schedule.
